Wowstick 4mm to 6mm Hex Bit Adapter

Wowstick electric screwdriver hex bit adapter.

So I bought a Wowstick for my projects, unfortunately the bits that came with it did not have the size I needed. However my other bit set had the correct size (H1.5) for my tiny screws. Unfortunately the other set was a 6.35mm or 1/4″ hex shaft and the Wowstick takes mini bit with a 4mm shaft. So I made an adapter.

This adapter takes any 1/4″ bit and allows you to use it with the Wowstick electric screwdriver. If you can find a small button size magnet then you can probably stick that inside the adapter and you will have a magnetised bit adapter.

You can download the STL file from the bottom of this post. I would suggest to print it at 0.1 layer height and 100% infill for durability.

Fusion360 3D Design
Actual 3D Printed Part

You may also like...

Popular Posts

Leave a Reply

Your email address will not be published. Required fields are marked *