When working from home maybe its time to organise and cleanup your desk. To start, I designed this headset mount / hook that attaches to your iMac’s left hand side of the screen. It attaches with some double sided tape and is not obtrusive.
![](https://www.candco.com.au/wp-content/uploads/2020/04/3d-printer.png)
Printed on: Prusa i3 MK3
![](https://www.candco.com.au/wp-content/uploads/2020/04/reel.png)
Filament used: 3D Fillies PLA+ Silver
![](https://www.candco.com.au/wp-content/uploads/2020/04/monitor.png)
Print mode: Build plate supports only
![](https://www.candco.com.au/wp-content/uploads/2020/04/dimension.png)
Print quality: 0.2mm
![](https://www.candco.com.au/wp-content/uploads/2020/04/minimize.png)
Fill density: 20%
![](https://www.candco.com.au/wp-content/uploads/2020/04/clock.png)
Print time: 1hr 40 min
![](https://www.candco.com.au/wp-content/uploads/2020/04/imac_headset_mounted-1024x768.jpg)